-
AIM was recently recognized for its work in creating an exceptional state-registered apprenticeship program for Plastics Process Technicians in the
-
John Beaumont featured on PlastChicks Podcast John Beaumont was featured on Episode 7 of the PlastChicks Podcast. Listen to him
-
An Introduction to iMFLUX Technology: Welcome to the Green Curve By: Jason Travitz, Sr. Processing Instructor, AIM iMFLUX’s process control
-
Gate Freeze: Is It Always the Gate? By: Jennifer Schmidt, Sr. Simulation Instructor It is not always gate freeze that
-
Plastic Degradation During Injection Molding By: David Rose, Senior Instructor When it comes to the injection molding of thermoplastic materials,
-
Moldflow vs. Mold Floor: When Simulation Doesn’t Match Reality By: Jennifer Schmidt, Sr. Simulation Instructor It can be a struggle
-
Mold vs. Machine: Evaluation Considerations By: Jason Travitz, Sr. Instructor, Processing Much can be written about Mold vs. Machine criteria
-
Why You Should Educate and Train Your Non-Technical Personnel By: David Hoffman, Director of the AIM Institute Before we get
-
Beaumont’s American Injection Molding (AIM) Institute is teaming up with iMFLUX, a wholly owned subsidiary of Procter & Gamble (P&G),
-
The AIM Institute has teamed up with Clarion University and the Keystone Community Education Council (KCEC) to help bridge the
-
Last month at Autodesk‘s Moldflow Summit 2018 in Troy, Michigan, the American Injection Molding Institute’s Plastics Technology & Engineering Certificate Program was highlighted by General
-
AIM will be presenting our Mold Start-up, Debug and Qualification course at the Manufacturers’ Association on March 28th – March
-
Plastics Technology Online recently featured the AIM Institute in an article discussing the Next Generation Plastics Workforce.
-
AIM Instructors John Bozzelli and Mike Sepe will be the keynote speakers at SPE’s upcoming TOPCON (Successful Plastic Part Design
-
The American Injection Molding (AIM) Institute, a Beaumont organization, is proud to announce its renowned Plastics Technology and Engineering (PTE)
-
MoldMaking Technology – Get all the facts before selecting a runner system solution. David Hoffman, Instructor and Director for Plastics Education and
-
The American Injection Molding (AIM) Institute, a Beaumont Technologies organization, is announcing it has moved its headquarters to an expanded
-
Details matter when it comes to selecting and integrating a hot runner system. This guide makes that process easier by
-
The American Injection Molding (AIM) Institute was represented in Plastics News a few days ago. The publication posted an article
-
MoldTrax and Beaumont’s American Injection Molding (AIM) Institute are excited to announce a brand new, first-of-its-kind conference for the injection
-
A hands-on, intensive course designed for molders by molders The American Injection Molding (AIM) Institute has launched a brand new
-
The American Injection Molding (AIM) Institute is excited to announce the addition of Jason Travitz to its team of instructors.
-
The American Injection Molding (AIM) Institute was represented at Plastic News’ Executive Forum in sunny Naples, FL a few weeks
-
The American Injection Molding (AIM) Institute has announced the release of its latest educational offering to the plastics industry. The
-
The March edition of SPE’s Plastics Engineering magazine has John Beaumont’s latest article “Designing Plastic Parts: Are You Considering Creep?”.
-
The January Plastics Engineering magazine feature’s John Beaumont’s latest article on the Fallacies of Mold Fill Balance. This piece talks
-
John Beaumont’s latest Question Everything article in SPE Engineering’s October issue is a must read. This series gets the plastics
-
Whirley Drinkworks is a plastic manufacturing company located in Warren, PA that designs and manufactures a wide variety of cups,
-
SPE’s Plastics Engineering magazine selects John Beaumont to write new article series titled “Question Everything”
-
The AIM Institute was recently featured in MoldMaking Technology Blog and Plastics Today Magazine in articles about the first graduating class
-
ERIE, PA- The American Injection Molding Institute, a growing plastics educational and research organization, announces the graduation of the first
-
Featured in Plastics Today: Beaumont Technologies, a leader in injection molding education and plastics engineering technologies, announced the launch of a
-
Featured in Plastics Technology Magazine: Beaumont Technologies, Erie, Pa, launched an injection molding certification program, hoping to fill the yawning
-
Beaumont Technologies and the AIM Institute were featured in a Plastics News article during NPE 2015. The article discusses the
-
President and CEO John Beaumont was interviewed at Plastics News’ Booth during NPE 2015. He discussed his Plastics Hall of
-
President John Beaumont inducted into Plastics Hall of Fame Nationally known plastics entrepreneur, inventor and educator John Beaumont has been inducted into
-
ERIE, PA- Beaumont Technologies, a leader in injection molding education and plastics engineering technologies, today launches a new educational initiative
-
Learn more about the AIM Institute at the upcoming NPE2015. We will be demonstrating our training techniques and our new
WE'RE HIRING! AIM is hiring an Injection Molding Process Instructor Learn More
