• Course Calendar
  • Log In
  • 1-866-344-9694
AIM Institute – American Injection Molding Institute
  • Online Courses
    • Plastics Bootcamp
    • Development Courses
    • Molding Math
    • Flow Grouping Diagnostics
    • Autodesk Moldflow Courses
    • Runner & Gating Design Strategies
  • Programs
    • Plastics Technology & Engineering Certificate
    • Process Technician Apprenticeship
  • Molders’ Series
    • Molding 1
    • Molding 2
    • Molding 3
  • Development Courses
    • Online Plastics Bootcamp
    • Online Flow Grouping Diagnostics
    • Online Runner and Gating Design Strategies
    • Plastics 101
    • Plastic Materials
    • Mold Design
    • Injection Molding
    • Part Design
    • Plastic Part Failure Analysis
    • Material Selection and Testing
  • Moldflow Courses
    • Online Autodesk Moldflow Courses
    • Understanding and Applying Moldflow Simulation
    • Moldflow Adviser
    • Moldflow Insight Fundamentals
    • Moldflow Insight Advanced Flow
    • Moldflow Insight Advanced Cool & Warp
    • GMW16355
    • Moldflow Custom Courses
  • iMFLUX
    • Introduction to iMFLUX
    • Applied iMFLUX Processing
  • About Us
    • Contact Us
    • Travel to AIM
    • Testimonials
    • News & Blog
    • Events
    • Instructors
    • Corporate Partners
    • Funding
    • Careers
Home / News and Blog / News

    AIM INSTITUTE NEWS

    • Beaumont and AIM Expand Sales Team
    • AIM Offers Online Moldflow Training
    • AIM + Beaumont Launch Free Webinar Series

Category Archives: News

Blog    News    Technical Articles   

 

    loading...

  • Beaumont and AIM Expand Sales Team

    Along with our parent company Beaumont, we are excited to announce the expansion of our North American sales team. We

    Read Full Story »

  • AIM Offers Online Moldflow Training

    The American Injection Molding (AIM) Institute is now offering Autodesk Moldflow Insight training online! One session each of our three

    Read Full Story »

  • AIM + Beaumont Launch Free Webinar Series

    Through the end of May, we will feature a weekly educational webinar – free and open to everyone. Each of

    Read Full Story »

  • AIM, Clarion, KCEC Receive Award for Apprenticeship Program

    AIM was recently recognized for its work in creating an exceptional state-registered apprenticeship program for Plastics Process Technicians in the

    Read Full Story »

  • John Beaumont on the PlastChicks Podcast

    John Beaumont featured on PlastChicks Podcast John Beaumont was featured on Episode 7 of the PlastChicks Podcast. Listen to him

    Read Full Story »

  • AIM Announces Training Partnership with iMFLUX

    Beaumont’s American Injection Molding (AIM) Institute is teaming up with iMFLUX, a wholly owned subsidiary of Procter & Gamble (P&G),

    Read Full Story »

  • AIM to Instruct NEW Plastics Apprenticeship Program

    The AIM Institute has teamed up with Clarion University and the Keystone Community Education Council (KCEC) to help bridge the

    Read Full Story »

  • GM Mandates Training at AIM for Employees

    Last month at Autodesk‘s Moldflow Summit 2018 in Troy, Michigan, the American Injection Molding Institute’s Plastics Technology & Engineering Certificate Program was highlighted by General

    Read Full Story »

  • AIM Offering Mold Start-up, Debug and Qualification Course through The Manufacturers’ Association

    AIM will be presenting our Mold Start-up, Debug and Qualification course at the Manufacturers’ Association on March 28th – March

    Read Full Story »

  • AIM “Bridging the Gap” in Plastics Industry Education

    Plastics Technology Online recently featured the AIM Institute in an article discussing the Next Generation Plastics Workforce.

    Read Full Story »

  • AIM Instructors Sepe and Bozzelli Keynote Speakers at Upcoming SPE Event

    AIM Instructors John Bozzelli and Mike Sepe will be the keynote speakers at SPE’s upcoming TOPCON (Successful Plastic Part Design

    Read Full Story »

  • Plastic Technology and Engineering Program Achieves Distinguished ANSI Accreditation

    The American Injection Molding (AIM) Institute, a Beaumont organization, is proud to announce its renowned Plastics Technology and Engineering (PTE)

    Read Full Story »

  • Choosing Between Cold and Hot Runner Systems

    MoldMaking Technology – Get all the facts before selecting a runner system solution. David Hoffman, Instructor and Director for Plastics Education and

    Read Full Story »

  • American Injection Molding (AIM) Institute and Beaumont Technologies Expand

    The American Injection Molding (AIM) Institute, a Beaumont Technologies organization, is announcing it has moved its headquarters to an expanded

    Read Full Story »

  • Six Key Factors for Evaluating a Hot Runner System

    Details matter when it comes to selecting and integrating a hot runner system. This guide makes that process easier by

    Read Full Story »

  • Plastics Industry Must Partner with Academia

    The American Injection Molding (AIM) Institute was represented in Plastics News a few days ago.  The publication posted an article

    Read Full Story »

  • MoldTrax and the American Injection Molding Institute Team Up for Industry First Mold Performance Technology Conference

    MoldTrax and Beaumont’s American Injection Molding (AIM) Institute are excited to announce a brand new, first-of-its-kind conference for the injection

    Read Full Story »

  • New Injection Molding Certificate Program Launches at AIM

    A hands-on, intensive course designed for molders by molders The American Injection Molding (AIM) Institute has launched a brand new

    Read Full Story »

  • AIM Hires Injection Molding Process Instructor

    The American Injection Molding (AIM) Institute is excited to announce the addition of Jason Travitz to its team of instructors.

    Read Full Story »

  • AIM’s education highlighted in Plastics News

    The American Injection Molding (AIM) Institute was represented at Plastic News’ Executive Forum in sunny Naples, FL a few weeks

    Read Full Story »

  • American Injection Molding Institute Launches New Medical Course

    The American Injection Molding (AIM) Institute has announced the release of its latest educational offering to the plastics industry. The

    Read Full Story »

  • Designing Plastic Parts: Are You Considering Creep?

    The March edition of SPE’s Plastics Engineering magazine has John Beaumont’s latest article “Designing Plastic Parts: Are You Considering Creep?”.

    Read Full Story »

  • Beaumont Talks Mold Fill Balance in Plastics Engineering Magazine

    The January Plastics Engineering magazine feature’s John Beaumont’s latest article on the Fallacies of Mold Fill Balance. This piece talks

    Read Full Story »

  • John Beaumont’s Latest Article is a Must Read

    John Beaumont’s latest Question Everything article in SPE Engineering’s October issue is a must read. This series gets the plastics

    Read Full Story »

  • Whirley Finds Value from the AIM Institute’s PTE Program

    Whirley Drinkworks is a plastic manufacturing company located in Warren, PA that designs and manufactures a wide variety of cups,

    Read Full Story »

  • John Beaumont to author new article series in SPE Magazine

    SPE’s Plastics Engineering magazine selects John Beaumont to write new article series titled “Question Everything”

    Read Full Story »

  • AIM Institute Helps Advance Injection Molding Careers and Fill Skills Gap

    The AIM Institute was recently featured in MoldMaking Technology Blog and Plastics Today Magazine in articles about the first graduating class

    Read Full Story »

  • AIM Institute announces first graduating class

    ERIE, PA- The American Injection Molding Institute, a growing plastics educational and research organization, announces the graduation of the first

    Read Full Story »

  • Beaumont Launches Education Initiative for Plastics Professionals

    Featured in Plastics Today: Beaumont Technologies, a leader in injection molding education and plastics engineering technologies, announced the launch of a

    Read Full Story »

  • Beaumont Creates American Injection Molding Institute

    Featured in Plastics Technology Magazine: Beaumont Technologies, Erie, Pa, launched an injection molding certification program, hoping to fill the yawning

    Read Full Story »

  • Beaumont Creates AIM Institute to Target Plastics-Intensive Training for Molders

    Beaumont Technologies and the AIM Institute were featured in a Plastics News article during NPE 2015. The article discusses the

    Read Full Story »

  • John Beaumont’s Live Interview at Plastics News NPE2015 Booth

    President and CEO John Beaumont was interviewed at Plastics News’ Booth during NPE 2015. He discussed his Plastics Hall of

    Read Full Story »

  • Hall of Fame Inductee

    President John Beaumont inducted into Plastics Hall of Fame Nationally known plastics entrepreneur, inventor and educator John Beaumont has been inducted into

    Read Full Story »

  • Beaumont Launches New Education Initiative for the Plastics Industry – AIM Institute

    ERIE, PA- Beaumont Technologies, a leader in injection molding education and plastics engineering technologies, today launches a new educational initiative

    Read Full Story »

  • Visit us at NPE 2015!

    Learn more about the AIM Institute at the upcoming NPE2015. We will be demonstrating our training techniques and our new

    Read Full Story »

  • PTE Program
  • Development Courses
  • Autodesk Moldflow Courses
  • News
  • About AIM
  • Contact
  • Beaumont
  • facebook
  • twitter
  • linkedin
  • rss

Plastics Professional Continuing Education & Training Courses

The AIM Institute is an Authorized Moldflow® Training Center. AIM’s Autodesk® Moldflow® Training Courses are the same courses offered by Autodesk®, but taught by the AIM Institute. They include a variety of instructor-led training courses for novice, intermediate, and advanced level users worldwide.

Increase your flow simulation productivity and workflow efficiencies by experiencing our Moldflow training courses.

AIM Institute

© Copyright 2021 American Injection Molding (AIM) Institute.

Privacy Policy | Call us at 1-866-344-9694 | Website by: PAPA Advertising

AIM's Statement on COVID-19 (Coronavirus)  Read the Latest